Recommend:
To the knowledge base

Cannot register FRITZ!Fon

Registration of FRITZ!Fon fails. The following messages are displayed:

  • In the FRITZ!Box user interface: "Registration with the DECT base station failed. The reason for the error is displayed on the cordless (DECT) telephone"
  • On the telephone's display: Registration at Base 1, 2, 3 or 4 failed" or "Search for base"

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Maximum number has been reached

You can register up to six cordless telephones, DECT headsets, or DECT door intercom systems with the FRITZ!Box. If six telephones or four telephones, a headset, and one door intercom system have already been registered, you cannot register any more telephones.

Note:You can delete telephones that you are not longer using under "Telephony > Telephony Devices" in the FRITZ!Box user interface.

2 Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

3 Unlocking the buttons

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Click on the "Keylock" tab.
  4. Disable the "Buttons locked" checkbox.
  5. Click "Apply" to save the settings.

4 Disabling "DECT Eco"

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "DECT" in the "Telephony" menu.
  3. Disable the option "DECT Eco" in the section "Radio Field Strength".
  4. Click "Apply" to save the settings.

Do not re-enable the "DECT Eco" option until you have successfully registered the telephone with the FRITZ!Box.

5 Setting a PIN

You may be using an incorrect PIN to register the telephone with the FRITZ!Box. Therefore, set a new PIN for the FRITZ!Box's base station:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "DECT" in the "Telephony" menu.
  3. Enter a four-digit PIN in the section "Registration".
  4. Click "Apply" to save the settings.

6 Installing the latest FRITZ!OS for the FRITZ!Box

  1. Install the latest FRITZ!OS on the FRITZ!Box.

7 Restoring the telephone to its factory settings

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Settings" and press "OK".
  3. "Reset" > "OK" > "OK"

8 Resetting FRITZ!Box and using the wizard to register the telephone

Settings in the FRITZ!Box may be preventing the telephone from being registered. Therefore, restore the FRITZ!Box to factory settings and then use the wizard in the FRITZ!Box user interface to register the telephone:

Saving settings of the FRITZ!Box

Saving the FRITZ!Box telephone books

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Book" in the "Telephony" menu.
  3. Select a telephone book, click the "Save" button, and save the telephone book as an XML file on your computer.

    Important:If Microsoft Edge blocks the file download, click "More actions" by the entry and then "Keep" or use a different browser.

  4. Save all of the telephone books stored in the FRITZ!Box, one after the other.

Loading the FRITZ!Box factory settings

  1. Load the FRITZ!Box's factory settings.

Using the FRITZ!Box wizard to register a telephone

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the "Configure New Device" button.
  4. Enable the option "Telephone (with or without answering machine)" and click "Next".
  5. Enable the option "Cordless (DECT) telephone" and click "Next".
  6. Start the registration procedure on the telephone, then click "Connect" and follow the instructions.
  7. If you are asked for the PIN of the base station, enter 0000 on your telephone. This is the factory setting of the FRITZ!Box.
  8. If you could successfully register the telephone with the FRITZ!Box, import the telephone books that you saved and reconfigure the FRITZ!Box.

    Important:Do not restore the settings saved in the file "fritzbox[...].export", otherwise the registration of new cordless telephones may fail again.

9 Testing a different telephone

Test whether you can register a different cordless telephone with the FRITZ!Box. Use a telephone that supports the DECT-GAP standard:

  1. Restore the FRITZ!Box settings.
  2. Use the wizard to register the other cordless telephone with the FRITZ!Box.
  3. If you can register the other cordless telephone with the FRITZ!Box, the first telephone is incorrectly configured or defective.