Recommend:
To the knowledge base

Configuring ringtones for FRITZ!Fon

FRITZ!Fon allows you to use different ringtones. In addition to the default ringtone, you can also set the following special ringtones:

  • different ringtones to signal incoming calls
  • ringtones for specific telephone book entries
  • ringtone for important persons from the FRITZ!Box telephone book
  • ringtone for internal calls
  • ringtone for the alarm

With the "Voice" ringtone, the caller's name is announced when they call if their telephone number is in your contacts. If there is no telephone book entry for the number, the city or the country from which the call is coming is announced. You can change ringer volume in the telephone's menu and also specify whether the ringer volume should increase.

Requirements / Restrictions

  • The FRITZ!Fon must be registered with a FRITZ!Box.
  • FRITZ!OS 7.50 or later is required to use the "Voice" ringtone and a MyFRITZ! account must be configured in the FRITZ!Box.

1 Enabling encryption in the FRITZ!Box

DECT encryption must be enabled in the FRITZ!Box, otherwise some ringtones are not available on the FRITZ!Fon, for example the "Voice" ringtone:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "DECT" in the "Telephony" menu.
  3. Enable the option "Permit only secure DECT connections (recommended)" in the section "Security".
  4. Click "Apply" to save the settings.
  5. If the option was disabled, you must then restart the FRITZ!Box once using the user interface ("System > Backup > Restart").

2 Configuring a voice ringtone in the FRITZ!Box

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for a FRITZ!Fon. The following settings apply for all telephones.
  4. Click on the "Ring Tones" tab.
  5. Enable the option for male or female voice in the section "Settings for Voice Ringtone".
  6. If you want to use the "voice" ringtone and play a ringtone at the same time, select the desired ringtone from the drop-down list "Additional ringtone". You can only use ringtones from the list. You cannot use other ringtones, for example your own, together with the "voice" ringtone.
  7. Click "Apply" to save the settings.

3 Setting up the ringtone in the telephone

Selecting the default ringtone

The telephone uses the default ringtone for all calls for which you selected the setting "Handset settings", "Handset external ring" or "Handset internal ring" in the user interface.

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Settings" and press "OK".
  3. "Audio" > "OK" > "Ring tone"
  4. Select the desired ringtone.
  5. Click "OK" to save the setting.

Enabling the "Voice" ringtone

The telephone uses the "Voice" ringtone for all calls for which you selected the "Voice" setting in the user interface.

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Settings" and press "OK".
  3. "Audio" > "OK"
  4. Enable the option "Speech ringing for external calls".

4 Configuring different ringtones to signal incoming calls

If your telephone reacts to several numbers, you can configure a special ringtone for each of the telephone numbers. This way you can immediately tell which number the caller dialed when you receive a call:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the respective telephone.
  4. Enable the option "React only to the following numbers".
  5. Select the telephone numbers the telephone should react to when you receive calls.

    Note:After assigning ringtones, you can once again enable the option "React to all numbers".

  6. Click "OK" to save the settings.
  7. Click the (Edit) button for the respective telephone.
  8. Click on the "Ring Tones" tab.
  9. From the drop-down lists, select the desired ringtone for all of the telephone numbers.
  10. Click "OK" to save the settings.

5 Assigning ringtones to specific telephone book entries

With your telephone you can assign special ringtones to individual telephone book entries so you can immediately tell who is calling you:

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Telephone book" and press "OK".
  3. Scroll to the desired entry and press "OK".
  4. Select "Change" and then press "OK".
  5. Under "AVM ringtone", select the current ringtone and press "OK".
  6. Select the desired ringtone from the list and press "OK".
  7. Press "OK" to save the settings.

6 Configuring ringtones for internal calls, important persons, and the alarm

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the respective telephone.
  4. Click on the "Ring Tones" tab.
  5. Select ringtones for internal calls, important persons, and the alarm.

    Note:For the alarm you can also select any internet radio station that you set up under "Home Network > Media Server > Web Radio".

  6. Click "Apply" to save the settings.

7 Setting the ringer volume

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Settings" and press "OK".
  3. "Audio" > "OK" > "Volume" > "OK" > "Ringer"
  4. Select the desired volume.
  5. If you want the ringer volume to increase, select "Options" and then "increasing". The ringer volume then increases to the desired volume.