Recommend:
To the knowledge base

Incorrect entries in the Mesh Overview

There may be occasional display errors in the Mesh Overview of the FRITZ!Box if devices are not directly connected to the FRITZ!Box or their connection type changes, for example.

The FRITZ!Box normally displays all of the devices in the home network so you can always get a quick overview of

  • which of your FRITZ! products, computers, smartphones, and other devices are currently active.
  • how your devices are connected to each other and what their transmission speed is.
  • whether guest access is enabled and which devices are using it. Devices using guest access are displayed with a suitcase symbol .
  • If the parental controls are blocking internet access of devices. Devices with an active device lock are displayed with a device lock symbol .
  • whether devices can be prioritized. Devices that are prioritized for real-time applications are displayed with a star symbol .
  • whether updates are available for your FRITZ! products. You can install these directly via the Mesh Overview.

Depending on the size and structure of the home network, it can take up to 10 minutes for the Mesh Overview to display all of the devices correctly. This applies to new devices, devices whose connection type changes, and devices that have been removed from the home network.

If you still see incorrect entries after 10 minutes, please observe the following.

Mesh Overview in the FRITZ!Box user interface

1 FRITZ! product is not marked with Mesh symbol

If an additional FRITZ!Box, a FRITZ!Repeater, FRITZ!Powerline with Wi-Fi support, or a FRITZ!Smart Gateway is not marked with the Mesh symbol in the Mesh Overview, the device was not correctly integrated into the Mesh. In this case, follow the instructions in the corresponding guide:

2 Device is not in the Mesh Overview

The FRITZ!Box cannot detect unmanaged switches that do not forward LLDP information and therefore cannot display them in the Mesh Overview. Devices that are connected to the FRITZ!Box via this type of unmanaged switch are displayed as if they were directly connected to a LAN port on the FRITZ!Box.

The FRITZ!Box also cannot always correctly determine the connection information of devices if they are connected to the FRITZ!Box by means of a FRITZ!Box without Mesh support or a router, wireless repeater, or powerline devices from another manufacturer. The devices in question are either not displayed in the Mesh Overview at all, or they are displayed with an incorrect connection type.

3 Device is displayed with an incorrect name

The FRITZ!Box displays devices with their host name if they obtain their IP settings from the FRITZ!Box via DHCP and send their names to the FRITZ!Box.

Devices that do not send their host name to the FRITZ!Box, for example all devices that do not obtain their IP settings from the FRITZ!Box, are displayed with their IP address (for example "PC-192-168-178-20") or powerline devices are displayed with their network device names.

If you want to change the name in the Mesh Overview, click "Details" for the respective device and enter the desired name in the field "Name" (do not use special characters).

Note:If you change a device name in the Mesh Overview, the FRITZ!Box will not display any subsequent name changes made on the device itself. In this case, change the name of the device in the Mesh Overview again.

4 Device is displayed with an incorrect connection type

The FRITZ!Box cannot always reliably determine the connection information of devices if they are connected to the FRITZ!Box through a switch, a FRITZ!Box without Mesh support or a router, wireless repeater, or powerline devices from another manufacturer.

Devices that are connected to the FRITZ!Box via a managed switch that forwards LLDP information are not displayed topologically behind the switch in the Mesh Overview, they are displayed on the same level as the switch instead.

Devices connected to the FRITZ!Box through an unmanaged switch that does not forward LLDP information, a FRITZ!Box without Mesh support or a router, wireless repeater, or powerline devices from another manufacturer are either not displayed in the Mesh Overview at all, or they are displayed with an incorrect connection type.

Note:In upcoming FRITZ!OS versions, we will optimize the display of managed switches and the devices connected to them.

5 Device is incorrectly displayed as a router

Routers, wireless repeaters, and powerline devices from different manufacturers are displayed in the Mesh Overview with a router symbol with two antennas . This symbol is also used for other devices through which additional devices connect with the FRITZ!Box (for example smartphones in hotspot mode).

If other devices (for example computers) are also displayed with this router symbol, that means that the FRITZ!Box has conflicting information about the devices. Either there are or were several devices in the home network with the same IP address or the same device name, or the connection type of the devices (LAN, Wi-Fi, powerline) changed.

To correct the display, turn off the respective devices and then click the (Delete) button for all idle connections. To avoid duplicate IP addressing, we recommend configuring all devices to automatically obtain their IP settings via DHCP.

6 Smart home devices shown connected to the Mesh Master

The Mesh Overview always assigns smart plugs, radiator controls, and other smart home devices to the FRITZ!Box configured as the Mesh Master because they can be centrally configured and controlled here. The actual DECT connection of the smart home devices is not displayed in the Mesh Overview.

7 Unknown devices are displayed

The FRITZ!Box displays all of the devices that are currently connected to the FRITZ!Box or were once connected to the FRITZ!Box. If your FRITZ!Box displays devices you are not familiar with in the Mesh Overview, follow the instructions in this guide:

8 Connection quality of FRITZ!Fon is only displayed sporadically

The FRITZ!Box only shows the connection quality of FRITZ!Fon models when they are being used to conduct calls or play music. Connection quality cannot be permanently displayed because FRITZ!Fon models do not send any data to the FRITZ!Box when they are in hibernation.