Recommend us:
To the Knowledge Base
Knowledge document #1172

Connecting FRITZ!Powerline with the home network via powerline

Connect your FRITZ!Powerline adapter to your FRITZ!Box via powerline to add an additional wireless access point to your home network quickly and easily. This way you will have ideal Wi-Fi reception and high-speed connections to the internet and home network, even when outside the Wi-Fi range of your FRITZ!Box.

If you use the same Wi-Fi settings in the FRITZ!Powerline adapter and the FRITZ!Box, your wireless devices will automatically connect with the Wi-Fi network with the strongest signal (Wi-Fi roaming).

Fig.: Connection scenario for powerline bridge mode

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the factory settings of the FRITZ!Powerline adapter

In order to perform the following steps, the second FRITZ!Powerline adapter that you want to add to the home network must be set to factory settings. If you bought FRITZ!Powerline in a set, perform these steps with the FRITZ!Powerline adapter with Wi-Fi support:

  1. Plug the FRITZ!Powerline adapter into an outlet and wait until the Power LED or WLAN LED remains lit or the Connect LED starts flashing slowly.
  2. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 1260E / 1220Connect15 seconds
    FRITZ!Powerline 1240EWLAN - WPS
    Powerline - Security
    15 seconds
    FRITZ!Powerline 1220E / 1000EPowerline · Security10-15 seconds
    FRITZ!Powerline 546E / 540EWLAN · WPS und Powerline · Security10 seconds
    FRITZ!Powerline 530E / 510ESecurity12 seconds
    FRITZ!Powerline 520E / 500EReset2 seconds
  3. During this process, all of the LEDs flash once. The Power LED or WLAN LED remains lit or the Connect LED starts flashing slowly as soon as the factory settings have finished loading.

2 Connecting FRITZ!Powerline adapters with each other

FRITZ!Powerline adapters from a set are already connected with each other and can be put into operation without configuring additional settings. If you purchased the FRITZ!Powerline adapters separately, you must connect the powerline adapters with each other first:

  1. Plug the FRITZ!Powerline adapter that you want to add to the powerline network into an outlet near a FRITZ!Powerline adapter that is already part of the powerline network.
  2. Wait until the FRITZ!Powerline adapter is ready for operation and the Power LED or WLAN LED remains lit.
  3. Briefly push the connection button on both of the FRITZ!Powerline adapters. You can push the button on whichever FRITZ!Powerline adapter you want first. The Powerline LED flashes when you release it. Depending on the FRITZ!Powerline model, several other LEDs flash at the same time.
    FRITZ!Powerline modelConnection button
    FRITZ!Powerline 1260EConnect
    FRITZ!Powerline 1240EWLAN - WPS
    Powerline - Security
    FRITZ!Powerline 1220E / 1000E / 546E / 540EPowerline · Security
    FRITZ!Powerline 530E / 520E / 510E / 500ESecurity
  4. The process is completed and the FRITZ!Powerline adapters are connected with each other as soon as the Powerline LED remains lit.

3 Connecting the FRITZ!Powerline adapter

  1. For setup, plug both of the FRITZ!Powerline adapters into outlets near the FRITZ!Box.
  2. If you bought an individual FRITZ!Powerline adapter: For setup, connect the first, existing FRITZ!Powerline adapter directly to a LAN port on the FRITZ!Box.
    • If you bought FRITZ!Powerline as a set: Use a network cable to connect the FRITZ!Powerline adapter without Wi-Fi support to a LAN port on the FRITZ!Box.

4 Connecting the FRITZ!Powerline adapter with the home network

  1. Plug the new FRITZ!Powerline adapter with Wi-Fi functionality into an outlet at the desired location. The Powerline LED on the FRITZ!Powerline adapter remains lit as soon as the powerline adapter is connected to the home network.