Recommend:
To the knowledge base

Setting up the FRITZ!Box for use with a mobile network

The FRITZ!Box Cable is ideally prepared for internet access via the mobile network. All you have to do is insert your SIM card into the FRITZ!Box and enter the PIN in the FRITZ!Box user interface, and then the complete FRITZ!Box range of functions for internet, telephony, and multimedia is available to all devices in your home network without restriction.

Requirements / Restrictions

  • The mobile network provider must support the mobile standard 4G (LTE) or 3G (UMTS/HSPA).

    Note:The 3G mobile network (UMTS/HSPA) has been switched off in Germany and many other countries.

  • Depending on the mobile network provider, functions that require a public IP address (for example receiving incoming VPN connections) are either not available, only available with at home packages, or only available to a limited extent.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Inserting the SIM card into the FRITZ!Box

  1. Insert the SIM card (mini SIM, 25 x 15 x 0.76 mm) that you received from your mobile network provider into the SIM card slot with the slanted edge of the card on the left and the contacts facing down.

    Important:Do not use SIM card holders with micro or nano-SIM cards that have already been punched out because they can get jammed and damage the SIM slot.

  2. Push the SIM card gently into the SIM card slot until it clicks into place. A few millimeters of the SIM card protrude from the SIM card slot.
    Inserting the SIM card

    Note:Press the SIM card briefly to remove it from the SIM card slot.

2 Screwing the mobile network antennas onto the FRITZ!Box

  1. Screw the two mobile network antennas included in the package onto the antenna sockets on the FRITZ!Box.
    Connecting the mobile network antennas

    Important:If you are using the FRITZ!Box in an area located on the edge of LTE radio coverage, the two mobile network antennas included in the package may not be sufficient for a stable radio connection. In this case, use an outdoor antenna.

3 Configuring the internet connection in the FRITZ!Box

  1. Open the FRITZ!Box user interface.
  2. Enter the FRITZ!Box password on the underside of the device and click "Log In".
  3. If the wizard for internet access does not start automatically, click "Wizards" and then "Configure the Internet Connection".
    Calling up the FRITZ!Box wizard
  4. Enable the option "Use mobile network for internet connection" and click "Next".
  5. Enter the PIN (Personal Identification Number) for your SIM card in the wizard.

    Important:The PIN contains only numbers and not letters or special characters. If you enter the wrong PIN three times, you must enter the SuperPIN/PUK. Your mobile network provider can provide you with information on the SuperPIN/PUK.

    • Now the FRITZ!Box determines your mobile network provider and internet service provider.
  6. If your internet service provider or plan is displayed correctly, click "Next" and follow the wizard's instructions.
    • If your internet service provider could not be determined, or the incorrect internet service provider or plan is displayed, click "Change Internet Service Provider" and follow the wizard's instructions.

4 Setting up telephony in the FRITZ!Box

If you want to connect telephones to the FRITZ!Box and use them to make calls over the internet:

You cannot configure mobile telephone numbers in the FRITZ!Box.

  1. Configure the internet telephone numbers in the FRITZ!Box.