Recommend:
To the knowledge base
Knowledge document #3676

Setting up a door intercom system on the Mesh Repeater

If you set up a door intercom system in the Mesh Master and an additional FRITZ!Box is set up as a Mesh Repeater, you can route the doorbell of the door intercom system to the Mesh Repeater. In addition, you can also see the live image and use the door opener on a FRITZ!Fon that is registered to the Mesh Repeater.

Requirements / Restrictions

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Routing doorbells to all telephones connected to the Mesh Repeater

  1. Click on "Telephony" in the user interface of the Mesh Master.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the door intercom system.
  4. Select the Mesh Repeater from the drop-down list "Route Doorbells to" by the doorbell you want to configure. You can either add the Mesh Repeater to a call group or select it separately.
  5. Click "Apply" to save the settings.

2 Routing doorbells to a telephone connected to the Mesh Repeater

Determining the internal number of the telephone

  1. Click on "Telephony" in the user interface of the Mesh Master.
  2. Click "Telephone Book" in the "Telephony" menu.
  3. Click on the "Internal numbers" tab.
  4. Make note of the internal number of the respective telephone, for example **620**611.

Assigning an internal number

  1. Click on "Telephony" in the user interface of the Mesh Master.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the door intercom system.
  4. Select the option "Telephone number" from the drop-down list "Route Doorbells to" by the doorbell you want to configure and enter the internal number of the telephone exactly the way it is shown in the user interface of the Mesh Master, for example **620**611.
  5. Click "Apply" to save the settings.

3 Entering live image and character sequence for door opener on the Mesh Repeater

If a call was already made from the door intercom system to the Mesh Repeater then the doorbell with its name is displayed in the internal telephone book of the Mesh Repeater:

  1. Click "Telephony" in the user interface of the Mesh Repeater.
  2. Click "Telephone Book" in the "Telephony" menu.
  3. Click on the "Internal numbers" tab.
  4. Click the (Edit) button for the doorbell.
  5. Enter the character sequence for the door opener.
  6. Enter the complete web address with the image files in the "Live image" field.
  7. Click "Apply" to save the settings.

Now the live image is also displayed on the Mesh Repeater and the character sequence for the door opener can be used on the Mesh Repeater.