Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
Extra confirmation to configure certain functions
The first time a sensitive function is changed or executed, you will be asked once for additional confirmation. The confirmation is then valid for one hour, so you do not have to reconfirm permission to make further changes during this time. If you log into the user interface again within this hour or open the user interface in a new browser window, you will be asked again for confirmation when executing a sensitive function.
When accessing it from the internet and the home network, you can enter a confirmation code from an authenticator app. In the home network, you can also push a button on the FRITZ!Box or use a telephone connected to the FRITZ!Box to confirm that the procedure may be executed.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Confirming execution by button
- Briefly push any button on your FRITZ!Box when the user interface asks you to do so. The LEDs on the FRITZ!Box flash once to confirm.
- Click "OK" in the "Procedure confirmed" window in the user interface to conclude the procedure.
2 Confirming execution with a telephone
IP telephones, for example FRITZ!App Fon, cannot send key commands to the FRITZ!Box. Therefore, you cannot use IP telephones to confirm execution:
- Enter the code displayed in the message in the user interface on the telephone and press the call key (pick up the handset).
- Hang up again after about 3 seconds.
- Click "OK" in the "Procedure confirmed" window in the user interface to conclude the procedure.
3 Using an authenticator app to confirm that procedure may be executed
If you configured the authenticator app for this user under "System > FRITZ!Box Users > Users", you can enter the verification code from the app:
Note:You can use any app as an authenticator app that supports the "TOTP" procedure, for example Google Authenticator, Microsoft Authenticator, 2FAS Authenticator, Authy.
- As soon as the user interface asks you to, enter the verification code from the authenticator app in the FRITZ!Box's message window. The code is displayed in the app for the user.
- Click "OK" in the "Procedure confirmed" window in the user interface to conclude the procedure.