Recommend:
To the knowledge base

FRITZ!Box reports "FRITZ!Box does not have an internal clock"

Various FRITZ!Box functions cannot be set up. The message "FRITZ!Box does not have an internal clock" is displayed on the respective page and the date 01.01.1970 may be displayed in the event log.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

2 Setting up the time server

The FRITZ!Box is already configured for use as a time server in the factory settings. If you adjusted the FRITZ!Box's settings, re-enter a valid time server:

Important:If you are using the FRITZ!Box with an internet connection from NetCologne, enter ntp.netcologne.de as the time server since NetCologne only allows time synchronization via this time server.

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Network" in the "Home Network" menu.
  3. Click on the "Network Settings" tab.
  4. In the "Time Synchronization" section, enter the NTP time server on the internet that the FRITZ!Box should synchronize its time with.

    Note:Normally it is not necessary to change the preconfigured NTP time server 2.europe.pool.ntp.org. Alternative NTP time servers can be found here.

  5. Enable the option "Make FRITZ!Box available as a time server in the home network".
  6. Click "Apply" to save the settings.