Unable to access the internet with FRITZ!WLAN Stick
A computer with a FRITZ!WLAN Stick cannot access the internet although the FRITZ!WLAN Stick is connected with the Wi-Fi network of the wireless router (for example FRITZ!Box). However, other devices connected to the router can access the internet.
One of the following error messages may be displayed in the "Network and Sharing Center" in Windows:
- "Unidentified Network"
- "Access: Local only"
- "Access type: No internet access"
Simply proceed as described below. After each measure, check whether the problem is solved.
1 Enabling the wireless router's DHCP server
To ensure that all of the wireless devices connected to the wireless router automatically obtain the correct IP settings, make sure that the router's DHCP server is enabled:
Note:For the following instructions, we used a FRITZ!Box as an example. If you are using a different wireless router, information on how to set it up can be obtained from the manufacturer, for example refer to the manual.
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Network" in the "Home Network" menu.
- Click on the "Network Settings" tab.
- If available, click "Additional Settings" in the section "WAN setting" or "LAN Settings" to display all of the settings.
- Click the button "IPv4 Configuration" or "IPv4 Addresses". If the button is not displayed, enable the Advanced View first.
- Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.
Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.
- Click "OK" to save the settings.
2 Configuring a computer to automatically obtain IP settings
To ensure that the computer always uses the correct IP settings, make sure that it automatically obtains its IP settings from the FRITZ!Box (this is the default setting for most operating systems):
- Configure the computer to automatically obtain IP settings via DHCP.
3 Configuring the computer's firewall
A firewall can interfere with the communication between the computer and the wireless router:
- Configure the firewall so that it allows connections from the computer to the wireless router. Information on how to set it up can be obtained from the manufacturer of the firewall, for example refer to the manual.
4 Installing the latest driver for the FRITZ!WLAN Stick
- Download the latest driver for your FRITZ!WLAN Stick from our FTP server https://ftp.avm.de/archive/cardware/fritzwlanusb.stick/.
- Double-click the file "avm_fritz!wlan_usb_stick [...].exe" and follow the instructions.
AVM Section Navigation