FRITZ!WLAN Repeater N/G Service - Knowledge Base

FRITZ!WLAN Repeater N/G Service

Connecting an audio device to FRITZ!WLAN Repeater

With FRITZ!WLAN Repeater you can transfer any audio content to a conventional playback device (for example a stereo system, FM radio). You can either use the analog or digital audio output, or the miniature FM transmitter to connect the audio device to the FRITZ!WLAN Repeater.

Note:The configuration procedure and notes on functions given in this guide refer to the latest firmware for the FRITZ!WLAN Repeater.

1 Connecting your audio device to the analog audio output

  1. Connect a cable with a 3.5 mm jack to the correct (round) socket on the underside of the repeater.
  2. Connect the cable to the line-in jack on your audio device.

    Note:The repeater's audio output is not suitable for connecting stereo headphones.

  3. Click "Audio" in the user interface of the FRITZ!WLAN Repeater.
  4. Click "Audio Output" in the "Audio" menu.
  5. Check the option "analog / digital (S/P-DIF)".
  6. Click "Apply" to save the settings.
  7. On the audio device, enable playback of line-in audio signals (for example "AUX").

    Note:You can find information on configuring the device in its manual, or consult its manufacturer directly.

2 Connecting your audio device to the digital output

  1. Connect a cable with a TOSLINK plug to the correct (gray) socket on the underside of the repeater.
  2. Connect the cable to your audio device's S/PDIF input.
  3. Click "Audio" in the user interface of the FRITZ!WLAN Repeater.
  4. Click "Audio Output" in the "Audio" menu.
  5. Check the option "analog / digital (S/P-DIF)".
  6. Click "Apply" to save the settings.
  7. On the audio device, enable playback of line-in audio signals (for example "Digital Input" or "Optical Input") .

    Note:You can find information on configuring the device in its manual, or consult its manufacturer directly.

3 Connecting your audio device by means of the miniature FM transmitter

  1. Click "Audio" in the user interface of the FRITZ!WLAN Repeater.
  2. Click "Audio Output" in the "Audio" menu.
  3. Enable the option "FM".
  4. Click "Apply" to save the settings.
  5. Make note of the available frequency displayed by the repeater after it performs the automatic scan and click "OK".
  6. Set your radio to the FM frequency you made note of.