FRITZ!Repeater 450E Service - Knowledge Base

FRITZ!Repeater 450E Service

Changing the FRITZ!Repeater's wireless settings

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Repeater.

1 Disabling the adoption of settings from the Mesh

When used in a Mesh, you must first disable the adoption of settings in the FRITZ!Repeater:

2 Changing the name of the wireless network (SSID)

  1. Click "Wireless" ("WLAN") in the user interface of the FRITZ!Repeater.
  2. Click "Radio Network" in the "Wireless" ("WLAN") menu.
  3. Enter a unique name in the field "Name of the wireless radio network (SSID)".
  4. Click "Apply" to save the settings.
  5. Reconfigure the wireless connection to the FRITZ!Repeater.

3 Change the wireless network key

  1. Click "Wireless" ("WLAN") in the user interface of the FRITZ!Repeater.
  2. Click "Security" in the "Wireless" ("WLAN") menu.
  3. Click on the "Encryption" tab.
  4. Enter a password in the "Network key" field. Use numerals, letters, and other characters, and combine capitals and lower-case letters.
  5. Click "Apply" to save the settings.
  6. Reconfigure the wireless connection to the FRITZ!Repeater.

4 Setting up the MAC address filter

  1. Click "Wireless" ("WLAN") in the user interface of the FRITZ!Repeater.
  2. Click "Security" in the "Wireless" ("WLAN") menu.
  3. Click on the "Encryption" tab.
  4. Enable the option "Do not allow any new wireless devices" in the "Restricting wireless LAN access" section.
  5. Click "Apply" to save the settings.

Now only wireless devices listed under "Restricting wireless LAN access" can connect to the FRITZ!Repeater's wireless network. If you want to add another wireless device to the list, you can briefly disable the MAC address filter to connect the wireless device with the FRITZ!Repeater. The wireless device's MAC address is then automatically added to the list.

5 Setting up a wireless LAN schedule

  1. Click "Wireless" ("WLAN") in the user interface of the FRITZ!Repeater.
  2. Click "Schedule" in the "Wireless" ("WLAN") menu.
  3. Enable the option "Use schedule for wireless radio network".
  4. Enable the option "Adopt scheduling settings from the FRITZ!Box" if the times for the FRITZ!Box should also be valid for the repeater.
    • If different times should apply to the repeater, set up your own schedule.
  5. Click "Apply" to save the settings.