FRITZ!Repeater 300E Service - Knowledge Base

FRITZ!Repeater 300E Service

Connecting the FRITZ!Repeater with the FRITZ!Box via Wi-Fi

Connect your FRITZ!Repeater to your FRITZ!Box via Wi-Fi to increase the Wi-Fi range of your home network easily and efficiently. The FRITZ!Repeater adopts all of the FRITZ!Box's Wi-Fi settings, such as access information and guest access, and can be used directly by all of the devices in the home network.

In this guide we show you how to easily connect your FRITZ!Repeater with your FRITZ!Box at the touch of a button (WPS - Push Button Configuration).

If you want to connect it manually, proceed as described in the guide Manually connecting the FRITZ!Repeater with the FRITZ!Box home network via Wi-Fi.

Fig.: Connection scenario for wireless bridge mode

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Repeater.

1 Loading the FRITZ!Repeater's factory settings

In order to perform the following steps, the FRITZ!Repeater must be set to factory settings:

  1. Plug the FRITZ!Repeater in.
  2. Wait about 1 minute until the FRITZ!Repeater has started and the "Power" and "WLAN" LEDs remain lit or the LEDs of the signal strength indicator flash.
  3. Push and hold down the "WPS" button down for about 15 seconds until all of the LEDs flash at the same time.

    Fig.: Loading the FRITZ!Repeater's factory settings

  4. The "Power" and "WLAN" LEDs remains lit as soon as the factory settings have finished loading.

2 Setting up the FRITZ!Repeater as a wireless bridge

  1. For setup, plug the FRITZ!Repeater into a power outlet near the FRITZ!Box.
  2. Wait about 1 minute until the FRITZ!Repeater has started and the "Power" and "WLAN" LEDs remain lit.
  3. Push and hold down the "WPS" button on the FRITZ!Repeater (for about 6 seconds) until its "WLAN" LED flashes.
  4. Within 2 minutes: Push and hold down the connect button on the FRITZ!Box until its confirmation LED lights up. Other LEDs may also light up:
    FRITZ!Box modelConnect buttonConfirmation LED
    FRITZ!Box 7590, 7530, 6890, 6850, 6660Connect / WPSConnect / WPS
    FRITZ!Box 6591, 6590Connect / WPSWLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490WLAN WPSWLAN / Info
    FRITZ!Box 6490WLAN WPSWLAN / DECT
    FRITZ!Box 7560WLANWLAN / DECT
    FRITZ!Box 7583, 7582, 7581WPSWLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490WPSWLAN
  5. One or more signal strength LEDs on the FRITZ!Repeater remain lit as soon as setup is completed.

3 Finding the ideal location for the FRITZ!Repeater

To extend the range as much as possible, the FRITZ!Repeater requires a fast and stable Wi-Fi connection to the FRITZ!Box:

  1. Position the FRITZ!Repeater so that at least three of its five signal strength LEDs light up. You can find tips on positioning it in the guide Finding the ideal location for FRITZ!Repeater.