FRITZ!Repeater 3000 - Knowledge Base

FRITZ!Repeater 3000

User interface of FRITZ!Repeater cannot be opened

Since setting up the FRITZ!Repeater, you cannot open its user interface. The user interface is not displayed when you enter fritz.repeater in the address bar of your web browser (for example Chrome, Firefox).

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Calling up the complete address

Some web browsers start a web search if you enter an unknown or incomplete address, for example Google Chrome using Google. To prevent this, you must enter the complete address http://fritz.repeater.

Fig.: Entering the complete address for the user interface in the address field of the web browser

2 Allowing wireless devices to communicate

If you are using the repeater with a FRITZ!Box, you can only open the user interface if communication between the FRITZ!Box and wireless devices is allowed:

  1. Click "Wireless" ("WLAN") in the FRITZ!Box user interface.
  2. Click "Security" or "Radio Network" in the "Wireless" ("WLAN") menu.
  3. Enable the option "The active wireless devices displayed below may communicate with each other".
  4. Click "Apply" to save the settings.

3 Clearing browsing data (cache)

Clear the cache of the web browser on computers with Windows or macOS:

  1. Press "CTRL + Shift + Del" on the keyboard at the same time, or press "CMD + Alt + E" for Safari.
  2. In the new window, click "Clear" or press Enter.

4 Opening the user interface with the FRITZ!Box

If you are using the repeater with a FRITZ!Box, you can use the FRITZ!Box's user interface to open the user interface of the repeater:

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Mesh Networking" or "Home Network Overview" in the "Home Network" menu.
  3. Click the link or the name of the repeater.

5 Opening the user interface with the the IP address

If you are using the repeater with a different router, the router must support DHCP name resolution so you can enter fritz.repeater to open the user interface. If the router does not support DHCP name resolution, use the IP address to open the user interface:

  1. Determine the IP address of the repeater. To find out how, refer to the router's manual, or consult its manufacturer directly.
  2. Enter the IP address of the repeater (for example http://192.168.178.25) in the address bar of your web browser.

If you still cannot open the user interface of the repeater after following the steps given in this guide, the repeater is not correctly connected with the router (for example FRITZ!Box) and you must reconnect the repeater with the FRITZ!Box or the other router.