FRITZ!Repeater 1200 - Knowledge Base

FRITZ!Repeater 1200

Connecting the FRITZ!Repeater with the FRITZ!Box via wireless LAN

You want to connect a FRITZ!Repeater to the FRITZ!Box via WiFi? ✓ Here we show you how easy it is.

Connect your FRITZ!Repeater to your FRITZ!Box via wireless LAN to easily and efficiently increase the wireless range (WiFi) of your home network. The FRITZ!Repeater adopts all of the wireless settings from the FRITZ!Box, such as wireless access information and guest access, and can be used directly by all wireless devices in the home network. If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is automatically integrated into the Mesh.

In this guide we show you how to easily connect your FRITZ!Repeater with your FRITZ!Box by pushing a button (WPS PBC - Push Button Configuration).

If you want to connect it manually, proceed as described in the guide Manually connecting the FRITZ!Repeater with the FRITZ!Box home network via wireless LAN. However, in this case the FRITZ!Repeater is not integrated into the Mesh.

Fig.: Connection scenario for wireless bridge mode

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Repeater.

1 Loading the FRITZ!Repeater's factory settings

In order to perform the following steps, the FRITZ!Repeater must be set to factory settings:

  1. Push and hold down the "Connect" button for 10-15 seconds.
  2. The LED now indicates by alternately flashing and lighting up that the factory settings are being loaded and that the FRITZ!Repeater will be restarted. This process may take several minutes.
  3. The LED flashes continuously for at least 1 minute as soon as the factory settings have finished loading.

2 Setting up the FRITZ!Repeater as a wireless bridge

  1. For setup, plug the FRITZ!Repeater into a power outlet near the FRITZ!Box. Now the FRITZ!Repeater starts. During this time, the LED flashes rapidly.
  2. Wait about 1 minute until the FRITZ!Repeater has started and the LED flashes more slowly.
  3. Briefly push the "Connect" button on the FRITZ!Repeater (for about 1 second). The LED starts to flash quickly after you release the button.
  4. Within 2 minutes: Push and hold down the connect button on the FRITZ!Box until its confirmation LED lights up. Other LEDs may also light up:
    FRITZ!Box modelConnect buttonConfirmation LED
    FRITZ!Box 7590, 7530, 6890, 6660 Connect / WPS Connect / WPS
    FRITZ!Box 6590 Connect / WPS WLAN / DECT
    FRITZ!Box 7490, 7430, 5490 WLAN WPS WLAN / Info
    FRITZ!Box 6490 WLAN WPS WLAN / DECT
    FRITZ!Box 7560 WLAN WLAN / DECT
    FRITZ!Box 7583, 7582, 7581 WPS WLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN
  5. The wireless connection is established about 5 seconds after the LED lights up.

3 Finding the ideal location for the FRITZ!Repeater

To optimally increase the range, the FRITZ!Repeater requires a fast and stable wireless connection to the FRITZ!Box:

  1. Place the FRITZ!Repeater so that the LED glows green and not orange.

    Note:If you are using a FRITZ!Box with FRITZ!OS 7, you can use FRITZ!App WLAN to find the ideal place for the FRITZ!Repeater.