Integrating a powerline adapter from another manufacturer into a FRITZ!Powerline network
Your FRITZ!Powerline adapter is compatible with the standard IEEE P1901. It can therefore be connected with all commercially available powerline adapters of the 500 and 200 Mbit/s class.
You can set up the connection quickly and easily at the push of a button. During setup, the password of the FRITZ!Powerline network is transmitted to the powerline adapter from the other manufacturer and an encrypted connection is established.
1 Connecting the powerline adapters with each other
- For setup, plug the powerline adapter from the other manufacturer into a power outlet near a FRITZ!Powerline adapter.
- Push the connect button on the powerline adapter from the other manufacturer. The procedure depends on the powerline adapter. Information on how to set it up can be obtained from the device's manufacturer, for example refer to the manual.
- Push the "Security" button on the FRITZ!Powerline adapter within 2 minutes.
- The "Powerline" LED on the FRITZ!Powerline adapter remains lit as soon as the procedure is completed.
AVM Section Navigation