FRITZ!Box 7583 Service - Knowledge Base

FRITZ!Box 7583 Service

Integrating FRITZ!Powerline into the Mesh via Wi-Fi

Integrate your FRITZ!Powerline adapter into the Mesh of your FRITZ!Box via Wi-Fi to increase the Wi-Fi range of your home network easily and efficiently. As a Mesh Repeater, the FRITZ!Powerline adapter automatically adopts all of the Wi-Fi settings from the FRITZ!Box (Mesh Master), such as access information and guest access, and can be used directly by all of the wireless devices in the home network.

As soon as the FRITZ!Powerline adapter is integrated into the Mesh, it is marked in the user interface of the Mesh Master with the Mesh symbol :

Fig.: Mesh overview with FRITZ!Powerline in wireless bridge mode

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the factory settings of the FRITZ!Powerline adapter

In order to perform the following steps, the FRITZ!Powerline adapter must be set to factory settings:

  1. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 540E / 546E"WLAN/WPS" and "Powerline · Security"10 seconds
    FRITZ!Powerline 1240E"WLAN-WPS/Powerline · Security"15 seconds
    FRITZ!Powerline 1260E"Connect"15 seconds
  2. All of the LEDs flash once during this process. The "Power" LED or "WLAN" LED remains lit as soon as the factory settings have finished loading.

2 Connecting the FRITZ!Powerline adapter with the home network

  1. Use a network cable to connect the FRITZ!Powerline adapter to a LAN port in your home network (for example on FRITZ!Box or FRITZ!Repeater).

3 Setting up the FRITZ!Powerline adapter as a wireless bridge

  1. Click "Access to Home Network" in the user interface of FRITZ!Powerline.
  2. Click the "Change type of connection" button in the "Access to Home Network" menu.
  3. Enable the option "Wireless bridge" and click "Next".
  4. In the list "Radio Networks (WLANs) Found", select the name (SSID) of your FRITZ!Box and click "Next".
  5. Configure the Wi-Fi settings and click "Next".
  6. Click "Finish" to save the settings.
  7. The "WLAN" LED on the FRITZ!Powerline adapter remains lit as soon as setup is completed.
  8. Clear the LAN connection between the FRITZ!Powerline adapter and FRITZ!Box.

4 Integrating FRITZ!Powerline adapter into the Mesh at the touch of a button

Integrate the FRITZ!Powerline adapter into the Mesh so that it automatically adopts the FRITZ!Box's Wi-Fi settings:

  1. Briefly push the connect button on the FRITZ!Powerline adapter (for about 1 second) and let go of it again. When you release the connect button, all of the LEDs start to flash.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260EConnect
    FRITZ!Powerline 1240EWLAN - WPS
    Powerline - Security
    FRITZ!Powerline 546EWLAN · WPS
    FRITZ!Powerline 540E
  2. Within 2 minutes: Push and hold down the connect button on the Mesh Master until its confirmation LED lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConfirmation LED
    FRITZ!Box 7590, 7530, 7520, 6890, 6660Connect / WPSConnect / WPS
    FRITZ!Box 6591, 6590Connect / WPSWLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490WLAN WPSWLAN / Info
    FRITZ!Box 6490, 6430WLAN WPSWLAN / DECT
    FRITZ!Box 7560, 7362 SLWLANWLAN / DECT
    FRITZ!Box 7583, 7582, 7580WPSWLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490WPSWLAN
  3. The process is complete as soon as the Mesh Master marks the FRITZ!Powerline adapter with the Mesh symbol in the Mesh overview.

5 Finding the ideal location for the FRITZ!Powerline adapter

To extend the range as much as possible, the FRITZ!Powerline adapter requires a fast and stable Wi-Fi connection to the FRITZ!Box:

  1. Position the FRITZ!Powerline adapter where the quality of the FRITZ!Box's wireless signal is good. You can find tips on positioning it in the guide Finding the ideal location for the Mesh Repeater.