FRITZ!Box 7560 Service - Knowledge Base
- FRITZ!Box 7590
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7530
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7369
- FRITZ!Box 7360
- FRITZ!Box 7340
- FRITZ!Box 7330
- FRITZ!Box 7272
- FRITZ!Box 6890 LTE
- FRITZ!Box 6840 LTE
- FRITZ!Box 6820 LTE
- FRITZ!Box 6810 LTE
- FRITZ!Box 6591 Cable
- FRITZ!Box 6590 Cable
- FRITZ!Box 6490 Cable
Cannot access the internet via the FRITZ!Box
Although the FRITZ!Box is configured for DSL internet access, computers, smartphones, or other devices connected to it cannot access the internet.
One of the following messages may be displayed in the "Network and Sharing Center" of the respective Windows computer:
- "Unidentified Network"
- "Access: Local only"
- "Access type: No internet access"
Important:If you are using your FRITZ!Box with a DSL, cable, or fiber optic modem, proceed as described in the guide Cannot access the internet via a different modem.
Simply proceed as described below. After each measure, check whether the problem is solved.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Checking the event log of the FRITZ!Box
- Click "System" in the FRITZ!Box user interface.
- Click "Event Log" in the "System" menu.
- Select "Internet connection" from the drop-down list.
- Check whether one of the following error messages is displayed and follow the instructions in the corresponding guide:
2 Enabling the FRITZ!Box's DHCP server
In the factory settings, the FRITZ!Box automatically assigns the correct IP settings to all devices via DHCP. If you disabled the FRITZ!Box's DHCP server, re-enable it:
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Network" in the "Home Network" menu.
- Click on the "Network Settings" tab.
- Click the "IPv4 Addresses" button. If the button is not displayed, enable the Advanced View.
- Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.
Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.
- Click "OK" to save the settings.
3 Configuring the device to automatically obtain IP settings
To ensure that the device always uses the correct IP settings, make sure that it automatically obtains its IP settings from the FRITZ!Box (this is the default setting for most devices):
- Configure the device to automatically obtain IP settings via DHCP.
4 Configuring a DNS server in the FRITZ!Box
In the factory settings, the FRITZ!Box uses the internet service provider's DNS server for the name resolution of web addresses. If you set up other DNS servers in the FRITZ!Box, re-enable the internet service provider's DNS server:
- Click "Internet" in the FRITZ!Box user interface.
- Click "Account Information" in the "Internet" menu.
- Click on the "DNS Server" tab. If the tab is not displayed, enable the Advanced View.
- Enable the option "Use DNSv4 servers assigned by the internet service provider (recommended)".
- If the section "DNSv6 Servers" is displayed, enable the option "Use DNSv6 servers assigned by the internet service provider (recommended)".
- Click "Apply" to save the settings.
5 Configuring the Internet Explorer
Perform the following step only if you are using Microsoft Internet Explorer and it displays the message "Web page unavailable while offline":
- Start the Internet Explorer.
- Open the "Tools" menu.
- If the menu "Work Offline" entry is displayed and there is a checkmark in front of it, click this entry to remove the checkmark.
- Click the "Internet Options" menu entry and then "Connections".
- Enable the option "Never dial a connection".
- Click "OK" to save the settings.
6 Configuring the computer's firewall
A firewall can interfere with the communication between the computer and the FRITZ!Box:
- Configure the firewall on the computer so that it allows connections from the computer to the FRITZ!Box. Information on how to set it up can be obtained from the manufacturer of the firewall, for example refer to the manual.
7 Installing the latest software for network adapters
- Install the latest driver for the computer's network adapter or the latest software for the respective device.
Note:Often the Windows Update does not offer all of the latest device drivers. Therefore, use the drivers from the manufacturer's website (for example Intel, Broadcom, Realtek).