FRITZ!Box 7530 Service - Knowledge Base
Setting up the FRITZ!Box as a DSL router (standard)
You want to connect a new FRITZ!Box and set it up? ✔ Keep your account information handy and simply start the wizard for internet access.
The FRITZ!Box automatically connects to the internet (operation as a DSL router) when you connect it to your DSL line and enter your personal account information in the FRITZ!Box user interface. All of the computers, smartphones, and other devices connected to the FRITZ!Box can then use the internet connection at the same time and have equal status.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Connecting the FRITZ!Box with your DSL line
- Connect the FRITZ!Box with the DSL line. If you are using the FRITZ!Box on a combined DSL and landline connection (analogue or ISDN), connect the FRITZ!Box as described in the manual.
Fig.: Using a DSL cable to connect FRITZ!Box with IP-based DSL line
2 Configuring internet access
- Open the FRITZ!Box user interface.
- Enter the FRITZ!Box password on the bottom of the device and click "Log In".
- If the wizard for internet access does not start automatically, click "Wizards" and then "Configure Internet Connection".
Fig.: Calling up the FRITZ!Box wizard
- If your internet service provider is displayed in the drop-down list, select your internet service provider. With some regional settings, not all of the preconfigured providers are displayed until you select "More internet service providers".
- If your internet service provider is not displayed in the drop-down list, select "Other internet service provider".
- Click "Next" and follow the wizard's instructions.
Now the FRITZ!Box uses the account information you entered to establish the internet connection. Configuration is completed when the message "The internet connection check was successful" is displayed.