FRITZ!Box 7530 Service - Knowledge Base

FRITZ!Box 7530 Service

Restricting Wi-Fi access to known devices (MAC address filter)

The FRITZ!Box's Wi-Fi network is already protected from unauthorized access by individual Wi-Fi security settings in the factory settings. With the FRITZ!Box's MAC address filter you can additionally specify that only specific wireless devices are allowed to connect to the FRITZ!Box.

In the FRITZ! Mesh, the FRITZ!Box (Mesh Master) transmits the list of known wireless devices to all Mesh Repeaters (for example FRITZ!Repeater). The MAC address filter therefore applies uniformly for all wireless access points in the Mesh.

Important:A MAC address filter alone does not provide sufficient protection from undesired access. In the Wi-Fi, MAC addresses are transmitted without encryption and can be easily changed ("MAC spoofing"). MAC addresses are therefore not suitable for the secure identification of wireless devices. This is especially the case with current mobile devices, some of which use a new, randomly generated MAC address for Wi-Fi connections on a daily basis.

Requirements / Restrictions

  • The MAC address filter does not restrict login to the Wi-Fi guest access.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Enabling the MAC address filter

  1. Click "Wi-Fi" in the FRITZ!Box user interface.
  2. Click "Security" in the "Wi-Fi" menu.
  3. Enable the option "Do not allow any new wireless devices" in the "Restrict access to Wi-Fi" section.
  4. Click "Apply" to save the settings.

Now only wireless devices listed in the section "Restrict access to Wi-Fi" are allowed to connect to the FRITZ!Box's Wi-Fi network.

2 Adding a new wireless device

To add the MAC address of a new wireless device to the list of "Known Wireless Devices", you can either temporarily disable the MAC address filter to automatically add the MAC address of the FRITZ!Box, or enter the MAC address manually:

  1. Click "Wi-Fi" in the FRITZ!Box user interface.
  2. Click "Security" in the "Wi-Fi" menu.
  3. Click "Add Wireless Device" in the section "Restrict access to Wi-Fi".
  4. Enter the MAC address of the wireless device.
  5. Click "OK" and then "Apply" to save the settings.