- FRITZ!Box 7590
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7490
- FRITZ!Box 7390
- FRITZ!Box 7369
- FRITZ!Box 7360
- FRITZ!Box 7340
- FRITZ!Box 7330
- FRITZ!Box 7272
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
- FRITZ!Box 6660 Cable
- FRITZ!Box 6591 Cable
- FRITZ!Box 6590 Cable
- FRITZ!Box 6490 Cable
- FRITZ!Box 5491
USB storage device is not detected by FRITZ!Box
The FRITZ!Box does not detect a USB storage device. After connecting it to the FRITZ!Box, the USB storage device is either not displayed at all under "Home Network > USB / Storage" in the user interface, or it is displayed as an "unknown" device.
Simply proceed as described below. After each measure, check whether the problem is solved.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Restarting the FRITZ!Box
Restart the FRITZ!Box while the USB storage device is connected to it:
- Click "System" in the FRITZ!Box user interface.
- Click "Backup" in the "System" menu.
- Click on the "Restart" tab.
- Click the "Restart" button.
2 Installing the latest FRITZ!OS for the FRITZ!Box
- Install the latest FRITZ!OS on the FRITZ!Box.
3 Checking whether the USB storage device is working properly
- For testing purposes, connect the USB storage device to a USB port on your computer.
- If the computer also does not recognize the USB storage device, then either the USB storage device or the USB cable is defective. In this case, contact the manufacturer.
4 Connecting the USB storage device directly to the FRITZ!Box
The following step is only necessary if the USB storage device is connected to the FRITZ!Box via a USB hub:
- For testing purposes, connect the USB storage device directly to the FRITZ!Box (i.e. without a USB hub).
- If the USB storage device is now detected, then the USB hub is defective or it does not support the USB storage device you connected.
5 Using an external power supply
The FRITZ!Box supplies USB devices with up to 500 mA in accordance with the USB specification. Perform the following step if the USB storage device's power consumption exceeds this:
Note:USB hard drives larger than 2.5" in size typically require more than 500 mA and often come with Y cables that can provide power through two USB ports. However, they can still often be used on a single USB port because many computers are equipped with USB ports that supply more than 500 mA.
- If a power adapter was included with your USB storage device, use the USB storage device's power adapter to plug it in.
- If a power adapter was not included, use a USB hub with its own power adapter (active USB hub) to connect the USB storage device to the FRITZ!Box.
AVM Section Navigation