FRITZ!Box 7390 Service - Knowledge Base
- FRITZ!Box 7340
- FRITZ!Box 7330
- FRITZ!Box 7272
- FRITZ!Box 6840 LTE
- FRITZ!Box 6820 LTE
- FRITZ!Box 6810 LTE
Wireless connection is only established with 130 Mbit/s instead of 300 Mbit/s
When your wireless device (for example a notebook, smartphone, game console) establishes wireless connections (WiFi) to the FRITZ!Box according to the wireless standard 802.11n, the throughput does not exceed 130 Mbit/s.
- A throughput of 300 Mbit/s can only be achieved when channels with a bandwidth of 40 MHz are used. Some wireless devices do not support channel widths of 40 MHz or only support them in the 5 GHz frequency band.
Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS.
Simply proceed as described below. After each measure, check whether the issue persists.
1 Configuring the wireless device to use 40 MHz channels
Perform the following step if the computer's wireless network adapter or the wireless device supports wireless channels with bandwidths of 40 MHz:
Note:You can find information on configuring the device in its manual, or consult its manufacturer directly.
- Configure the wireless network adapter or the wireless device so that it uses wireless channels with bandwidths of 40 MHz.
You can configure many Intel wireless network adapters for channels with bandwidths of 40 MHz. In order to do so, call up the properties of the wireless network adapter in the Windows Device Manager and select "auto" for "802.11n Channel Width for band 2.4":
2 Establishing a wireless connection to the 5 GHz frequency band
As a rule, channel bandwidths of 40 MHz are supported in the 5 GHz frequency band. Therefore, switch to the 5 GHz frequency band if you are currently using the 2.4 GHz frequency band to establish the wireless connection, and the wireless network adapter or wireless device supports the 5 GHz frequency band:
Note:Not all wireless devices support the 5 GHz frequency band.
FRITZ!WLAN Stick AC 430, FRITZ!WLAN Stick AC 860 and FRITZ!WLAN Stick N (v2) support the 5 GHz frequency band.
- Click "Wireless" ("WLAN") in the FRITZ!Box user interface.
- Click "Radio Network" in the "Wireless" ("WLAN") menu.
- Enable the option "Wireless radio network enabled" in the "5-GHz Frequency Band" section.
- Enter a different name in the field "Name of the wireless radio network (SSID)" so that you can distinguish the 5 GHz wireless network from the 2.4 GHz wireless network in the future.
Important:Not all wireless devices support all special characters. Therefore, only use standard Latin letters (not letters such as ä, ë, ö, ü, á, é, í) and numbers in the wireless network name.
- Click "Apply" to save the settings.
- Establish a wireless connection to the FRITZ!Box wireless network with the name (SSID) that you assigned to the 5 GHz frequency band.
3 Checking the event log of the FRITZ!Box
- Click "System" in the FRITZ!Box user interface.
- Click "Event Log" in the "System" menu.
- Select "Wireless" from the drop-down list.
- Check whether the message "Wireless LAN transmission quality increased by reduced channel bandwidth [...]" is displayed.
- If the message is displayed: