FRITZ!Box 7369 Service - Knowledge Base

FRITZ!Box 7369 Service

Conducting internal calls

If several telephones are connected to your FRITZ!Box, you can conduct (free) internal calls between the telephones. For example, you can use a cordless telephone to call a telephone connected to an analog extension of the FRITZ!Box.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Conducting internal calls

Configuring a telephone to use the keypad function

Keypad sequences are strings of characters and numbers that you can use to enable or disable functions. No configuration is necessary to use keypad sequences with telephones, such as FRITZ!Fon C5, that are registered with the base station of your FRITZ!Box. If you are using a cordless telephone that is not registered with the FRITZ!Box's base station, you must enable the keypad function first:

  1. Configure the telephone so you can send keypad sequences (sequences of characters and numbers, such as *121#) and enter special characters such as * and # with it. On many telephones, you can configure this function in the menu "Operation at a PBX > Dialing options > Dial * and #".

Making internal calls

  1. If all of the telephones connected to the FRITZ!Box should ring, enter **9 to initiate a broadcast call. The call is conducted with the party who picks up the telephone first.
    • If a specific telephone should ring, enter ** followed by the internal telephone number of the telephone.

      To call a telephone connected to the "FON 1" port, enter **1.

      Note:You can find the internal numbers of the telephony devices in the FRITZ!Box user interface under "Telephone Book > Internal Numbers".