FRITZ!Box 7369 Service - Knowledge Base
- FRITZ!Box 7590
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 7340
- FRITZ!Box 7330
- FRITZ!Box 7272
- FRITZ!Box 6890 LTE
- FRITZ!Box 6840 LTE
- FRITZ!Box 6820 LTE
- FRITZ!Box 6810 LTE
- FRITZ!Box 6591 Cable
- FRITZ!Box 6590 Cable
- FRITZ!Box 6490 Cable
- FRITZ!Box 5491
- FRITZ!Box 5490
Firewall reports attacks on TCP port 80 or 14013 or unsolicited packets of type 0x88e1
This guide deals with the following issues:
- A firewall on a computer in the FRITZ!Box home network reports regular attacks ("Syn Flood", "Denial of Service (DoS)") on TCP port 80 and/or 14013.
- Every five seconds, a firewall or an application for analyzing network connections such as Wireshark reports packets of type 0x88e1 (EtherType).
Connections do not pose a security threat
The incoming connections do not originate from the internet. Instead, they originate from the FRITZ!Box and do not pose a security threat.
- TCP Port 80:
The FRITZ!Box uses TCP port 80 to check regularly whether computers or other devices connected to the FRITZ!Box offer web services accessible over HTTP, such as a user interface. The web services of these devices can be accessed directly under "Home Network > Network" in the FRITZ!Box user interface.
- TCP port 14013:
The FRITZ!Box uses TCP port 14013 to check regularly whether the FRITZ!Box Parental Control software is installed on the Windows computers in the home network. This software informs the FRITZ!Box which Windows user account is being used on the computers, allowing it to then restrict internet access for certain Windows users.
- Type 0x88e1:
The FRITZ!Box uses packets of EtherType 0x88e1 to check regularly whether any FRITZ!Powerline adapters are present in the network. Any adapters it finds are displayed in the FRITZ!Box user interface under "Home Network > Network".
Note:If you do not want to receive these messages, configure the device's firewall so that it allows incoming connections to TCP port 80 and 14013 or packets of type 0x88e1. Refer to the manufacturer of the firewall for information on how to set it up, for example consult the manual.