Cannot access the internet via a different modem
Some or all of the devices connected to the FRITZ!Box cannot access the internet when the FRITZ!Box establishes the internet connection using an external DSL, fiber optic, or cable modem.
One of the following messages may be displayed in the "Network and Sharing Center" of the respective Windows computers:
- "Unidentified Network"
- "Access: Local only"
- "Access type: No internet access"
Simply proceed as described below. After each measure, check whether the problem is solved.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Restarting the modem
- Restart the modem by unplugging it briefly.
Note:It may take several minutes for the modem to restart. You cannot access the internet while it is restarting.
2 Restarting the FRITZ!Box
- Unplug the FRITZ!Box for 5 seconds.
Note:The FRITZ!Box settings are retained when you unplug it. The restart takes about 2 minutes. During this time, you cannot access the FRITZ!Box.
3 Checking the event log of the FRITZ!Box
- Click "System" in the FRITZ!Box user interface.
- Click "Event Log" in the "System" menu.
- Select "Internet Connection" from the drop-down list.
- Check whether there are any error messages.
- If the message "PPPoE error: Timeout [...]" is displayed, follow the steps in our guide FRITZ!Box reports "PPPoE error".
- If you are using the FRITZ!Box on a cable connection and the message "Internet connection failed: Reason for error: 2 (DHCPv4 no answer on DISCOVER)" is displayed, contact your cable provider.
4 Enabling the FRITZ!Box's DHCP server
In the factory settings, the FRITZ!Box automatically assigns the correct IP settings to all devices via DHCP. If you disabled the FRITZ!Box's DHCP server, re-enable it:
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Home Network Overview" in the "Home Network" menu.
- Click on the "Network Settings" tab.
- Click the "IPv4 Addresses" button. If the button is not displayed, enable the Advanced View first.
- Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.
Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.
- Click "OK" to save the settings.
5 Configuring the device to automatically obtain IP settings
To ensure that the device always uses the correct IP settings, make sure that it automatically obtains its IP settings from the FRITZ!Box (this is the default setting for most devices):
- Configure the device to automatically obtain IP settings via DHCP.
6 Configuring a DNS server in the FRITZ!Box
In the factory settings, the FRITZ!Box uses the DNS server of the internet service provider for the name resolution of web addresses. If you set up other DNS servers in the FRITZ!Box, re-enable the DNS server of the internet service provider:
- Click "Internet" in the FRITZ!Box user interface.
- Click "Account Information" in the "Internet" menu.
- Click on the "DNS Server" tab. If the tab is not displayed, enable the Advanced View first.
- Enable the option "Use DNSv4 servers assigned by the internet service provider (recommended)".
- If the section "DNSv6 Servers" is displayed, enable the option "Use DNSv6 servers assigned by the internet service provider (recommended)".
- Click "Apply" to save the settings.
7 Configuring the computer's firewall
The following step is only necessary if an additional firewall is installed on the computer:
- Configure the firewall on the computer to allow connections from the computer to the FRITZ!Box. Refer to the manufacturer of the firewall for information on how to set it up, for example consult the manual.
8 Checking the modem
The modem may be defective or malfunctioning. Therefore, check whether you can establish an internet connection if you connect the modem directly to a computer:
- Use a network cable to connect the modem to a computer.
- On the computer, configure an internet connection that uses the modem. Refer to the manufacturer of the operating system for information on the procedure.
- Check whether the computer can connect to the internet.
- If you were able to successfully connect the internet, proceed with the following section.
- If you were not able to connect to the internet, contact the modem's manufacturer or the retailer or internet service provider you bought your modem from.
9 Reconfiguring the internet connection in the FRITZ!Box
- Reconfigure internet access to rule out incorrect configuration of the FRITZ!Box:
AVM Section Navigation