FRITZ!Box 7340 Service - Knowledge Base
- FRITZ!Box 6840 LTE
- FRITZ!Box 6591 Cable
- FRITZ!Box 6590 Cable
- FRITZ!Box 6490 Cable
- FRITZ!Box 5491
- FRITZ!Box 5490
Enabling energy-saving mode for USB hard drives
The FRITZ!Box can enable energy-saving mode (standby) for USB hard drives connected to it when they are idle.
Requirements / Restrictions
- The USB hard drive and the USB hard drive housing must support energy-saving mode.
- The USB remote connection function is not enabled for USB storage devices (under "Home Network > USB Devices > USB remote connection" in the user interface).
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
Enabling the energy-saving mode in the FRITZ!Box
- Click "Home Network" in the FRITZ!Box user interface.
- Click "USB Devices" in the "Home Network" menu.
- Enable the energy-saving mode for USB hard drives.
- From the drop-down list, select the number of minutes of inactivity after which the energy-saving mode will be enabled for the USB hard drive.
- Click "Apply" to save the settings.
Now the USB hard drive will be switched to energy-saving mode whenever it has been idle for the amount of time (for example 10 minutes) you specified.