FRITZ!Box 7340 Service - Knowledge Base

FRITZ!Box 7340 Service

Enabling or disabling automatic outside line access

Automatic outside line access is enabled in the factory settings, but you can use telephones connected to the FRITZ!Box's analog extensions to disable and reenable it for the respective extension.

Note:You can only disable automatic outside line access for the analog extensions. Automatic outside line access is always enabled for all other connection types (for example DECT).

1 Disabling automatic outside line access

  1. Enter #1[Ext]*0*#91** on your telephone and press the call button (lift the receiver).
    • For [Ext], enter the number of an analog extension on the FRITZ!Box.

      Example:
      Enter #11*0*#91** to disable automatic outside line access for the "FON 1" port.

  2. Hang up again after about 3 seconds.

2 Enabling automatic outside line access

  1. Enter #1[Ext]*1*#91** on your telephone and press the call key (lift the receiver).
    • For [Ext], enter the number of an analog extension on the FRITZ!Box.

      Example:
      Enter #11*1*#91** to enable automatic outside line access for the "FON 1" port.

  2. Hang up again after about 3 seconds.