FRITZ!Box 6890 LTE Service - Knowledge Base

FRITZ!Box 6890 LTE Service
Not your product?
This document is also available for the following products:

Connecting outdoor LTE antenna to FRITZ!Box

If you are using the FRITZ!Box in an area located on the edge of LTE radio coverage or in a building with strong sources of interference, the two LTE antennas included in the package may not be sufficient for successful radio traffic. In this case, you can increase the transmission and reception power of the FRITZ!Box by using an outdoor LTE antenna (for example on your balcony or mounted on your roof) available from an electronics retailer.

1 Using a suitable outdoor LTE antenna

When selecting a suitable outdoor LTE antenna and antenna cable, it must meet the following criteria:

  1. The outdoor LTE antenna is suitable for the LTE frequency band being used.
  2. The German Federal Network Agency limited the maximum transmitter power for LTE to 23 dBm EIRP +-2 dB tolerance. The transmitter power of the FRITZ!Box's antenna sockets lies within this range. This is the maximum permissible emission level for LTE end devices that are used outside the house. When buying an antenna, you must therefore make sure that it does not exceed the maximum permissible transmitter power. The manufacturer or specialized vendors can provide you with information on the transmitter power when using outdoor LTE antennas.
  3. The outdoor LTE antenna has an SMA plug (Sub-Miniature-A).
  4. The plug(s) on the antenna cable are the same height of the socket(s) on your FRITZ!Box to ensure optimal contact.

2 Connecting an outdoor LTE antenna

  1. If your outdoor antenna only has one connector, connect the antenna to the transmitting antenna socket on the FRITZ!Box. If you look at the socket panel of the FRITZ!Box, this is the antenna socket on the left next to the "DSL" socket (see fig.). Connect one of the antennas included with delivery to the other antenna socket on the FRITZ!Box.

    Fig.: Connecting an outdoor LTE antenna

  2. If your outdoor antenna has two connectors (MIMO - Multiple Input Multiple Output), connect the antenna to both of the antenna connectors on the FRITZ!Box.

3 Adjusting the LTE antennas

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "LTE Information" in the "Internet" menu.
  3. Click on the "Reception" tab.
  4. Click the "Start Alignment Aid" button.