FRITZ!Box 6810 LTE Service - Knowledge Base

FRITZ!Box 6810 LTE Service

Setting up FRITZ!Box for internet access via the mobile network (LTE)

The FRITZ!Box Cable is ideally prepared for internet access via the mobile network. All you have to do is insert your SIM card into the FRITZ!Box and enter the PIN in the FRITZ!Box user interface, and then the complete FRITZ!Box range of functions for internet and multimedia is available to all devices in your home network without restriction.

Requirements / Restrictions

  • Depending on the mobile network operator, functions that require a public IP address (for example receiving incoming VPN connections) are either not available, only available with at home packages, or only available to a limited extent.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Inserting the SIM card into the FRITZ!Box

  1. Pick up the FRITZ!Box so you are facing the underside of the device and can read the "SIM Card" label on the SIM card slot.
  2. Insert the SIM card (mini-SIM, 25 x 15 x 0.76 mm) that you received from your LTE provider into the SIM card slot with the slanted edge of the card on the left and the contacts facing downwards (see fig.).

    Important:Do not use SIM card holders with micro or nano SIM cards that have already been punched out because they can get jammed and damage the SIM slot.

  3. Push the SIM card gently into the SIM card slot until it clicks into place.

    Fig.: Inserting the SIM card

    • A few millimeters of the SIM card protrude from the SIM card slot.

      Note:Press the SIM card briefly to remove it from the SIM card slot.

2 Configuring the internet connection in the FRITZ!Box

  1. Open the FRITZ!Box user interface.
  2. If the FRITZ!Box is set to factory settings, set a password for the FRITZ!Box user interface, and click "Register" and then"Next".

    Fig.: Assigning a password for user interface

  3. If the wizard for internet access does not start automatically, click "Wizards" and then "Configure Internet Connection".

    Fig.: Calling up the FRITZ!Box Wizard

  4. Enter the PIN (Personal Identification Number) for your SIM card.

    Important:The PIN contains only numbers and not letters or special characters. If you enter the wrong PIN three times, you must enter the SuperPIN/PUK. Information on the PIN and SuperPIN/PUK can be obtained from your LTE provider.

  5. Select your internet service provider from the drop-down list. If your internet service provider is not displayed, select "Other internet service provider".
  6. Click "Next" and follow the wizard's instructions.

3 Setting up telephony in the FRITZ!Box

If you received login data for internet telephony from a provider and want to use telephones with the FRITZ!Box:

You cannot configure mobile telephone numbers in the FRITZ!Box.

  1. Configure the internet telephone numbers in the FRITZ!Box.