- FRITZ!Box 7590
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7369
- FRITZ!Box 7360
- FRITZ!Box 7340
- FRITZ!Box 7330
- FRITZ!Box 7272
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
- FRITZ!Box 6820 LTE
- FRITZ!Box 6660 Cable
- FRITZ!Box 6591 Cable
- FRITZ!Box 6590 Cable
- FRITZ!Box 6490 Cable
- FRITZ!Box 5530 Fiber
FRITZ!Box reports "Wi-Fi transmission quality increased by reduced channel bandwidth"
Computers, smartphones, or other wireless devices display a low speed for the Wi-Fi connection to the FRITZ!Box's 2.4 GHz frequency band displayed. The following message is displayed in the event log of the FRITZ!Box:
- "Wi-Fi transmission quality increased by reduced channel bandwidth (2.4 GHz)"
- The FRITZ!Box recognizes when the Wi-Fi channels it uses in the 2.4 GHz frequency band are in heavy use by other Wi-Fi networks. To ensure stable Wi-Fi connections, it automatically reduces the channel bandwidth from 40 MHz to 20 MHz. This FRITZ!Box behavior is conform to Wi-Fi coexistence.
Although wireless devices then display a lower data rate, the user data rate is increased because there is less interference and the Wi-Fi connection is no longer affected by constant retransmissions.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Finding the ideal location for the FRITZ!Box
- If possible, place the FRITZ!Box in a centrally located room. The FRITZ!Box has omnidirectional antennas. The Wi-Fi signal is therefore emitted spherically in all directions.
- Do not place the FRITZ!Box directly in the corner of a room.
- Place the FRITZ!Box so that it is as unobstructed as possible, i.e. not directly in back of or under an obstacle such as pieces of furniture or a heater.
- Place the FRITZ!Box as high in the room as possible, for example on a shelf.
- Place the FRITZ!Box so that there are as few obstacles as possible between it and the wireless devices. Even small objects in the immediate vicinity of your FRITZ!Box can greatly reduce the range of the Wi-Fi signal. Metallic objects or objects containing water, such as radiators, refrigerators, or even houseplants, significantly reduce the quality of the Wi-Fi signal.
- Place the FRITZ!Box away from other radio transmitters, such as microwaves, wireless speakers, or Bluetooth devices.
2 Selecting the best Wi-Fi channel
In the factory settings, the FRITZ!Box automatically checks the Wi-Fi environment and selects the Wi-Fi channel settings. However, with some disturbances it cannot determine the best Wi-Fi channel for all wireless devices. Therefore, select the Wi-Fi channel in the FRITZ!Box that is least affected by interference in the Wi-Fi environment:
- Click "Wi-Fi" in the FRITZ!Box user interface.
- Click "Wi-Fi Channel" ("Radio Channel") in the "Wi-Fi" ("Wireless") menu.
- Click the link "Show disturbances to wireless network" in the section "Wi-Fi environment".
- Use the diagram to determine which channel in the lower frequency range is least affected by other Wi-Fi networks and interference.
- Enable the option "Adjust Wi-Fi channel settings" ("Adjust radio channel settings") in the section "Wi-Fi Channel Settings".
- From the drop-down list "Radio channel", select the Wi-Fi channel that was the least affected.
- Click "Apply" to save the settings.
- If the issue with your Wi-Fi connection still occurs, repeat steps 3 - 7 with a Wi-Fi channel in the middle and then with one in the higher frequency range. Then, use the Wi-Fi channel with the least interference.
Important:The diagram of the Wi-Fi environment only reflects the current situation! The allocation of the frequency band can change significantly over the course of the day because many Wi-Fi networks are turned on when in use. Therefore, check several times to see which Wi-Fi channels are least affected by interference.
Now the FRITZ!Box automatically selects the best Wi-Fi channel settings. If the message "Wi-Fi transmission quality increased by reduced channel bandwidth (2.4 GHz)" is still displayed in the event log of the FRITZ!Box, this is because all of the Wi-Fi channels in the 2.4 GHz frequency band are in heavy use by adjacent Wi-Fi networks.
AVM Section Navigation