FRITZ!Box 6810 LTE Service - Knowledge Base

FRITZ!Box 6810 LTE Service

Telephone does not ring when you receive a call

One or more of the telephones connected to the FRITZ!Box sometimes do not ring or never ring when you receive a call, although you can make calls.

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS.

Simply proceed as described below. After each measure, check whether the issue persists.

1 Number of calls via a DECT repeater is limited

When you receive a call, only two of the telephones located in the coverage area of a DECT repeater from a different manufacturer ring. If you are using a FRITZ!DECT Repeater or a FRITZ!Box in DECT repeater mode, up to five telephones ring at the same time.

2 Disabling the do not disturb function, call blocking and call through

The do not disturb function, call blocking, call diversion or call through may be preventing the telephone from ringing. Disable these functions in the FRITZ!Box:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the button (Edit) for the respective telephone.
  4. Click on the "Do Not Disturb" tab, disable any "Do Not Disturb" settings, and click "OK".
  5. Click "Telephony" and then "Call Handling"; delete any call blocks that may be present.
  6. Click on the "Call Through" tab, disable call through and click "Apply".

3 Disabling "DECT Eco"

The following steps are only necessary if the issue occurs with a cordless telephone:

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Disable the option "DECT Eco" in the "Radio Field Strength" section.
  4. Click "Apply" to save your settings.

If the telephone now rings, then the DECT connection to the telephone was interrupted. All devices that emit radio waves are possible sources of interference. Examples of these are other DECT base stations, baby monitors, mobile telephones and television antennas. If the telephone does not receive the "wake up" signal from the FRITZ!Box in time and as a result does not wake up from standby mode, moving the telephone to a different location may help.

4 Assigning telephone numbers to a telephone

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the button (Edit) for the respective telephone.
  4. Configure the telephone so that it reacts to incoming calls to the desired number: Enter the number under "Outgoing calls" or under "Incoming calls", or enable the option "React to all numbers".
  5. Click "OK" to save the settings.

5 Having your numbers checked

If the telephone still does not ring when you receive incoming calls to an Internet telephone number although the Internet connection and Internet telephone number are correctly configured, your Internet telephony provider is experiencing technical difficulties:

Important:After porting your telephone number (for example after switching to an IP-based line), you can often make calls with the number immediately. However, you cannot receive calls to this number for one or two more days because the telephone number is not completely ported until then.

  • Contact your Internet telephony provider and have your number checked.