Using an ISDN telephone system with the FRITZ!Box
If you connect your ISDN telephone system (PBX) to the FRITZ!Box, the devices connected to the telephone system can use all of the telephone numbers entered in the FRITZ!Box.
Requirements / Restrictions
- The ISDN telephone system must be suitable for use on an ISDN point-to-multipoint line. If the telephone system is designed for use on an ISDN BRI, proceed as described in this guide.
1 Configuring telephone numbers in the FRITZ!Box
Configure all of your telephone numbers in the FRITZ!Box:
- Configure the internet telephone numbers in the FRITZ!Box.
2 Connecting the telephone system to the FRITZ!Box
- Connect the telephone system to the "FON S0" socket on the FRITZ!Box.
3 Configuring the telephone system in the FRITZ!Box
- Click "Telephony" in the FRITZ!Box user interface.
- Click "Telephony Devices" in the "Telephony" menu.
- Click the "Configure New Device" button.
- Enable the option "ISDN telephone system" (or "ISDN PBX"), click "Next", and follow the wizard's instructions.
4 Configuring the extensions of your telephone system
If you do not assign telephone numbers to the extensions of the telephone system, the main telephone number configured in the FRITZ!Box is used to make outgoing calls. In addition, all of the extensions react to all incoming calls. Therefore, assign the desired telephone numbers to the extensions:
- In the telephone system, define which numbers the extensions should react to when you receive calls and which number they should use to make calls. Enter the numbers in the telephone system as they are displayed in the settings for the ISDN telephone system in the FRITZ!Box user interface (see fig.).
Note:Sometimes a number may be too long for you to enter the complete number in the ISDN device. If this is the case, do not enter the entire number. Instead, enter as many of the last digits as possible.
Fig.: Settings for the ISDN telephone system in the FRITZ!Box user interface
5 Disabling the energy-saving mode in the FRITZ!Box
The FRITZ!Box is equipped with a number of energy-saving mechanisms. For example, communication between the internal S0 bus and ISDN devices is terminated when there are no active connections. Some ISDN devices have problems with this function. Therefore, disable this function in the FRITZ!Box if ISDN devices are having problems establishing connections:
- Configure the telephone so you can send keypad sequences (sequences of characters and numbers, such as *121#) and enter special characters such as * and # with it. On many telephones, you can configure this function in the menu "Operation at a PBX > Dialing options > Dial * and #".
Disabling the energy-saving mode
- Enter #966*1* on your telephone and press the call key (pick up the handset).
- Hang up again after about 3 seconds.
Note:You can re-enable this function by entering #966*0*.
AVM Section Navigation