FRITZ!Box 5490 Service - Knowledge Base

FRITZ!Box 5490 Service
Not your product?
This document is also available for the following products:

Connecting FRITZ!Powerline with a Mesh Repeater (cascading)

You can cascade several Mesh Repeaters in the Mesh. This type of cascading makes it possible for you to extend your home network in a specific direction beyond the Wi-Fi range of a Mesh Repeater.

This means that not only can you connect your FRITZ!Powerline adapter with the FRITZ!Box (Mesh Master), you can also connect it with an already existing Mesh Repeater. It does not matter whether the Mesh Repeater is another FRITZ!Powerline adapter, a FRITZ!Box, or a FRITZ!Repeater.

In this guide we show you how to connect your new FRITZ!Powerline adapter with an already existing Mesh Repeater.

Fig.: Example of Wi-Fi cascading with FRITZ!Repeater and FRITZ!Powerline

Requirements / Restrictions

  • The existing Mesh Repeater is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh overview.
  • FRITZ!OS 7 or later is installed on the FRITZ!Powerline adapter.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the factory settings of the FRITZ!Powerline adapter

In order to perform the following steps, the new FRITZ!Powerline adapter must be set to factory settings:

  1. Plug the FRITZ!Powerline adapter into a power outlet.
  2. Wait about 1 minute until the "WLAN" LED remains lit.
  3. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 540E / 546E"WLAN/WPS" and "Powerline · Security"10 seconds
    FRITZ!Powerline 1240E"WLAN-WPS/Powerline · Security"15 seconds
    FRITZ!Powerline 1260E"Connect"15 seconds
  4. All of the LEDs flash once during this process. The "Power" LED or "WLAN" LED remains lit as soon as the factory settings have finished loading.

2 Connecting the FRITZ!Powerline adapter with the available Mesh Repeater

Connecting the FRITZ!Powerline adapter

  1. Use a network cable to connect the new FRITZ!Powerline adapter to a LAN port on the existing Mesh Repeater.

Setting up the FRITZ!Powerline adapter

  1. Click "Access to Home Network" in the user interface of FRITZ!Powerline.
  2. Click the "Change the Type of Connection" button in the "Access to Home Network" menu.
  3. Enable the option "Wireless bridge" and click "Next".
  4. In the table, use the MAC address to select the Wi-Fi network of the existing Mesh Repeater and click "Next".

    Note:You can find the MAC address under "Wi-Fi > Wi-Fi Network" ("Wireless > Radio Network") in the user interface of the Mesh Repeater.

  5. Enter the Wi-Fi access information of the Mesh Repeater and click "Next".
  6. Click "Finish" to save the settings.
  7. The "WLAN" LED on the new FRITZ!Powerline adapter remains lit as soon as setup is completed.
  8. Clear the LAN connection between the new FRITZ!Powerline adapter and the home network.

3 Adding the FRITZ!Powerline adapter to the Mesh

  1. Briefly push the connect button on the FRITZ!Powerline adapter (for about 1 second) and let go of it again. When you release the connect button, all of the LEDs start to flash.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260EConnect
    FRITZ!Powerline 1240EWLAN - WPS
    Powerline - Security
    FRITZ!Powerline 546EWLAN · WPS
    FRITZ!Powerline 540E
  2. Within 2 minutes: Push and hold down the connect button on the Mesh Master until its confirmation LED lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConfirmation LED
    FRITZ!Box 7590, 7530, 7520, 6890, 6850, 6660Connect / WPSConnect / WPS
    FRITZ!Box 6591, 6590Connect / WPSWLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490WLAN WPSWLAN / Info
    FRITZ!Box 6490, 6430WLAN WPSWLAN / DECT
    FRITZ!Box 7560, 7362 SLWLANWLAN / DECT
    FRITZ!Box 7583, 7582, 7580WPSWLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490WPSWLAN
  3. The process is complete as soon as the Mesh Master marks the FRITZ!Powerline adapter with the Mesh symbol in the Mesh overview.

4 Finding the ideal location for the FRITZ!Powerline adapter

To extend the range as much as possible, the new FRITZ!Powerline adapter requires a fast and stable Wi-Fi connection to the existing Mesh Repeater:

  1. Position the FRITZ!Powerline adapter where the quality of the Mesh Repeater's Wi-Fi signal is good. You can find tips on positioning it in the guide Finding the ideal location for the Mesh Repeater.