FRITZ!Box 4040 Service - Knowledge Base

FRITZ!Box 4040 Service

"Info" LED flashes

The "Info" LED on your FRITZ!Box indicates various operation statuses. If the "Info" LED flashes red, it means that there is a FRITZ!Box error. If the "Info" LED flashes green, this indicates different events, for example when the free data volume has been exceeded. In this guide we describe the various causes and how to stop the flashing.

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

Follow the instructions in the section that describes the error you observed.

1 "Info" LED flashes red

If the "Info" LED flashes red, it often means that a FRITZ!OS update was not successful. Even if you did not manually update FRITZ!OS, the automatic update function may be enabled in your FRITZ!Box; in this case, you may be unaware that your FRITZ!Box attempted to install the latest FRITZ!OS version. In this case, you are usually no longer able to access the FRITZ!Box and certain FRITZ!Box functions may no longer work:

2 "Info" LED flashes green after connecting FRITZ!WLAN USB Stick

The "Info" LED flashes continuously if you connect the FRITZ!WLAN Stick to your FRITZ!Box to transmit the wireless security settings using Stick & Surf, but Stick & Surf is not enabled in the FRITZ!Box. Proceed as follows to stop the flashing, and successfully transmit the wireless settings:

Stopping the flashing

  • Remove the FRITZ!WLAN Stick from the FRITZ!Box USB port.
    • The “Info” LED stops flashing.

Enabling Stick & Surf

Use a computer connected to the FRITZ!Box to enable Stick & Surf in the FRITZ!Box user interface so you can use Stick & Surf again:

  1. Click "Wireless" ("WLAN") in the FRITZ!Box user interface.
  2. Click "Security" in the "Wireless" ("WLAN") menu.
  3. Enable the option "Enable AVM Stick & Surf" in the "Additional Security Settings" section.
  4. Click "Apply" to save the settings.

Now you can reconnect your FRITZ!WLAN Stick to the FRITZ!Box. As long as the "Info" LED on the FRITZ!Box flashes, the wireless network security settings are still being transmitted to the FRITZ!WLAN Stick. Once they have been successfully transmitted, the "Info" LED remains lit; you can remove the FRITZ!WLAN Stick and connect it to your computer.

3 Info LED flashing green

The FRITZ!Box user interface offers you a choice of events that can cause the "Info" LED to flash.

Checking which event is configured for the "Info" LED

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Check which event was defined for the "Info" LED.

Stopping the flashing

If the event "Free data volume / free online time exhausted" was selected:

  • Increase the values given for the data volume or number of hours per month that you entered on the "Online Meter" tab under "Internet > Online Monitor"; if necessary, contact your provider about purchasing additional data volume or connection time.