FRITZ!Box 4040 Service - Knowledge Base

FRITZ!Box 4040 Service

Connecting the FRITZ!Repeater with the Mesh Repeater (cascading)

You want to connect an additional FRITZ!Repeater to an existing FRITZ!Repeater? ✔ Find out how to cascade them here.

You can cascade several Mesh Repeaters in the Mesh. This type of cascading makes it possible for you to extend your home network in a specific direction beyond the wireless range of a Mesh Repeater.

This means that in addition to connecting your FRITZ!Repeater with the FRITZ!Box (Mesh Master), you can also connect it with an already existing Mesh Repeater. It does not matter whether the Mesh Repeater is another FRITZ!Repeater, a FRITZ!Box, or a FRITZ!Powerline adapter.

In this guide we show you how to connect your new FRITZ!Repeater with an already existing Mesh Repeater.

Fig.: Wireless cascading with FRITZ!Repeater

Requirements / Restrictions

  • The existing Mesh Repeater is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh overview.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the FRITZ!Repeater's factory settings

In order to perform the following steps, the new FRITZ!Repeater must be set to factory settings:

2 Connecting FRITZ!Repeater with a Mesh Repeater at the push of a button

  1. For setup, place the new FRITZ!Repeater near the existing Mesh Repeater.
  2. Wait about 1 minute until the "Power" LED and "WLAN" LED on the new FRITZ!Repeater remain lit or the "Connect" LED on the new FRITZ!Repeater flashes more slowly.
  3. Briefly push the "WPS" or "Connect" button on the new FRITZ!Repeater (for about 1 second) and let go of it again. The "WLAN" LED starts to flash or the "Connect" LED starts to flash quickly after you release the button.
  4. Within 2 minutes: Push and hold down the connect button on the existing Mesh Repeater for the time indicated in the table:
    Mesh RepeaterConnect buttonDuration
    FRITZ!Box 7590, 7530, 6890 Connect / WPS about 1 second
    FRITZ!Box 7490, 7430 WLAN WPS about 6 seconds
    FRITZ!Box 7560 WLAN about 6 seconds
    FRITZ!Box 7583, 7582, 7581, 4040, 4020, 3490 WPS about 1 second
    FRITZ!Repeater Connect or WPS about 1 second
    FRITZ!Powerline 1260E Connect about 1 second
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    about 1 second
    FRITZ!Powerline 546E, 540E WLAN · WPS about 1 second
  5. One or more of the new FRITZ!Repeater's signal strength LEDs remain lit or the LED for connection quality glows green as soon as the wireless connection is established.

3 Integrating the FRITZ!Repeater into the Mesh at the touch of a button

  1. Briefly push the "WPS" or "Connect" button on the new FRITZ!Repeater (for about 1 second) and let go of it again. The "WLAN" LED starts to flash or the "Connect" LED starts to flash quickly after you release the button.
  2. Within 2 minutes: Push and hold down the "WPS" button on the Mesh Master for about 1 second until the "WLAN" LED flashes.
  3. The FRITZ!Repeater is fully integrated into the Mesh about 5 seconds after one or more signal strength LEDs on the new FRITZ!Repeater remain lit or the LED for connection quality glows green.

4 Finding the ideal location for the FRITZ!Repeater

To optimally increase the range, the new FRITZ!Repeater requires a fast and stable wireless connection to the existing Mesh Repeater:

  1. Position the FRITZ!Repeater so that, depending on the FRITZ!Repeater model, at least three of its five signal strength LEDs light up or the LED for connection quality glows green and not orange.

    Note:You can use FRITZ!App WLAN to find the ideal place for the FRITZ!Repeater.