Since updating FRITZ!OS, "Power" LED flashes
Since updating FRITZ!OS, the FRITZ!Box can no longer establish a DSL connection. The FRITZ!Box's "Power" LED flashes continuously since the update and the following error message is displayed in the event log of the FRITZ!Box:
"DSL not responding (no DSL synchronization)"
Simply proceed as described below. After each measure, check whether the problem is solved.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Restarting the FRITZ!Box
- Unplug the FRITZ!Box for 5 seconds.
Note:The FRITZ!Box settings are retained. The restart takes about 2 minutes. During this time, you cannot access the FRITZ!Box.
2 Checking the event log of the FRITZ!Box
- Click "System" in the FRITZ!Box user interface.
- Click "Event Log" in the "System" menu.
- If the message "DSL is available (DSL synchronization exists with [...] kbit/s)" is displayed in addition to the message "DSL not responding", follow the steps in our guide FRITZ!Box reports that the DSL connection drops frequently.
3 Resetting the interference resistance
Set the control for interference resistance to "Maximum Performance" since otherwise you will not be able to establish a DSL connection with some DSL lines:
Note:The interference resistance should only be changed if your DSL connection is occasionally interrupted, for example due to brief disturbances on the DSL line.
- Click "Internet" in the FRITZ!Box user interface.
- Click "DSL Information" in the "Internet" menu.
- Click on the "Interference Resistance" ("Line Settings") tab. If the tab is not displayed, enable the Advanced View first.
- Click the "Reset Setting" link.
- Now the interference resistance is automatically set to "Maximum Performance".
4 Using the previous DSL version
The DSL version of the FRITZ!Box undergoes constant development with each FRITZ!OS to ensure that it can establish optimal DSL connections under all circumstances. In individual cases (for example on DSL lines with outdated DSLAMs) the FRITZ!Box may only be able to establish a DSL connection with certain DSL versions. Therefore, enable previous DSL version:
Now the FRITZ!Box enables the previous DSL version and restarts. If the FRITZ!Box still cannot establish a DSL connection, follow the steps in our guide "Power" LED flashes.
AVM Section Navigation