FRITZ!Box 3272 Service - Knowledge Base

FRITZ!Box 3272 Service

Forgot password for accessing user interface

The FRITZ!Box password offers you protection from unauthorized access to your FRITZ!Box. If you forget this password, you can no longer access the FRITZ!Box's settings or functions, and you cannot login to it.

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

Simply proceed as described below. After each measure, check whether the issue persists.

1 Sending an access link with push service mail

If you entered an e-mail address for the "forgot password" push service under "Push Service" in the "System" menu of the FRITZ!Box, you can have the FRITZ!Box send you an access link that you can then use to log into the FRITZ!Box user interface again:

  1. Open the FRITZ!Box user interface.
  2. Click "Forgot your password?" under the password request.

    Note:If the button "Send Push Service mail" is not visible, then this push service is not enabled.

  3. Click "Send Push Service Mail".
    • Now an e-mail containing a link for setting a new password is sent to the e-mail address you entered for the "forgot password" push service.
  4. Call up your e-mail with the same device you used to request the access link and follow the instructions in the e-mail.

2 Using MyFRITZ! to access the FRITZ!Box

If you set up a MyFRITZ! account for a user with the right to view and edit all FRITZ!Box settings from the Internet, you can log in with this user. Once you have successfully logged in, you can change the password required to access the home network:

  1. Call up myfritz.net in a web browser.
  2. Enter the e-mail address you used to register with MyFRITZ! in the field.
  3. Solve the CAPTCHA.
  4. Enter your MyFRITZ! password and click "To Your FRITZ!Box" (see fig.).

    Fig.: Logging into myfritz.net

    • You will now be redirected to the MyFRITZ! home page of your FRITZ!Box.
  5. If the web browser says that the connection is not trusted or not safe, confirm the security warning as follows:

    Note:The connection to the FRITZ!Box does not pose a security risk. The web browser only displays this warning because the FRITZ!Box's individual security certificate is unknown to third party organizations that validate certificates.

    • Google Chrome: "Advanced > Proceed to [...].myfritz.net (unsafe)".
    • Mozilla Firefox: "Advanced > Add Exception... > Confirm Security Exception".
    • Microsoft Edge: "Continue to this webpage (not recommended)".
    • Microsoft Internet Explorer: "Continue to this website (not recommended)."
    • Apple Safari: "Continue".
  6. Enter the password that you entered when setting up your MyFRITZ! account for the FRITZ!Box user and click "Log In".

Now the MyFRITZ! home page for your FRITZ!Box is called up and you can access the FRITZ!Box user interface. You can change the password for accessing the home network in the "System" menu under "FRITZ!Box Users" on the "Login to the Home Network" tab.

3 Loading the FRITZ!Box factory settings

If you did not enable the "push service" in your FRITZ!Box or you cannot access the e-mail address you entered, you must load the FRITZ!Box's factory settings.

Important:When you load the factory settings, all of the settings you made in the FRITZ!Box are deleted.

However, if you previously saved your settings to a backup file, you can restore your settings after you have loaded the factory settings.

Loading the factory settings

  1. Briefly unplug the FRITZ!Box.
  2. Open the FRITZ!Box user interface within the next 10 minutes.
  3. Click "Forgot your password?" under the password request.
  4. Click the "Restore Factory Settings" button.
    • The factory settings are loaded and the FRITZ!Box is restarted.
  5. When it is finished, enter a new password and click "OK".

Restoring settings

If you saved the settings of your FRITZ!Box, then you can restore them after you have loaded the factory settings. However, do not restore FRITZ!Box users and their passwords from the backup file as otherwise you will reimport the unknown password for the user interface. Therefore, only restore selected settings:

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restore" tab.
  4. Enter the password you entered when saving the file.
  5. Click "Browse" and select the file "FRITZ.Box[...].export" with the settings you would like to restore.
  6. Enable the option "Select manually the settings to be restored".
  7. Click the "Restore" button.
  8. Enable the settings you would like to restore except for the option "FRITZ!Box user" and click "Apply".

The settings are now restored.

Note:Configure the "push service" so you will be able to recover your password, should you forget it again.