Detailed information about FRITZ! Mesh - Which FRITZ! products support Mesh?

Detailed information about FRITZ! Mesh

Integrating FRITZ!Repeater into the Mesh via LAN

Integrate your FRITZ!Repeater into your FRITZ!Box's Mesh via LAN to easily and efficiently increase the wireless range (WiFi) of your home network. As a Mesh Repeater, the FRITZ!Repeater automatically adopts all of the wireless settings from the FRITZ!Box (Mesh Master), such as wireless access information and guest access, and can be used directly by all wireless devices in the home network.

As soon as the FRITZ!Repeater is integrated in the Mesh, it is marked in the user interface of the Mesh Master with the Mesh symbol :

Fig.: Mesh overview with FRITZ!Repeater in LAN bridge mode

1 Loading the FRITZ!Repeater's factory settings

In order to perform the following steps, the FRITZ!Repeater must be set to factory settings:

2 Integrating the FRITZ!Repeater into the Mesh at the touch of a button

To set up the FRITZ!Repeater as a LAN bridge, first connect it to the Mesh Master via wireless LAN. The FRITZ!Repeater is automatically integrated into the Mesh:

  1. For setup, position the FRITZ!Repeater near the Mesh Master. If the FRITZ!Repeater is already connected to the home network over LAN, clear this connection.
  2. Wait about 1 minute until the "Power" LED and "WLAN" LED on the FRITZ!Repeater remain lit or the "Connect" LED on the FRITZ!Repeater flashes more slowly.
  3. Briefly push the "WPS" or "Connect" button on the FRITZ!Repeater (for about 1 second) and let go of it again. The "WLAN" LED starts to flash or the "Connect" LED starts to flash quickly after you release the button.
  4. Within 2 minutes: Push and hold down the connect button on the Mesh Master for the time indicated in the table until its "WLAN" LED flashes:
    Connect buttonDuration
    Connect / WPS about 1 second
    WPS about 1 second
    WLAN about 6 seconds
    WLAN WPS about 6 seconds
  5. One or more signal strength LEDs on the FRITZ!Repeater remain lit or the LED for connection quality glows green; after about 5 seconds the FRITZ!Repeater is fully integrated into the Mesh.

3 Configuring the FRITZ!Repeater as a LAN bridge

  1. Click "Access to Home Network" in the user interface of the FRITZ!Repeater.
  2. Click the "Change type of connection" button in the "Access to Home Network" menu.
  3. Enable the option "LAN bridge" and click "Next".
  4. Select which IP settings the FRITZ!Repeater should use and click "Next".
  5. Keep the wireless settings displayed for the FRITZ!Repeater and click "Next".
  6. Click "Finish" to save the settings.

4 Connecting the FRITZ!Repeater with the home network

  1. Connect the FRITZ!Repeater to a LAN port in your home network (for example on a FRITZ!Box, FRITZ!Powerline adapter).

Now the FRITZ!Repeater is integrated into the Mesh and is available as an additional wireless access point. The signal strength LEDs or the LED for connection quality indicate the quality of the wireless connection of the first device to establish a connection to the FRITZ!Repeater's wireless network.